Dating pacific reloading press

I have loaded steel using a scale to weigh powder and shot and what you are thinking would work fine for that.

dating pacific reloading press-20dating pacific reloading press-21

The roll crimp is the most commonly seen style for revolver cartridges.

As the name implies, the roll crimp entails forming a slight radius at the case mouth by pressing it inward against the bullet.

Making a proper decision as to which type of crimp should be used requires some understanding of bullet design, and the nature of the crimp involved.

While there are several different styles or types of crimps, most will fall into one of two categories; a roll crimp, or a taper crimp.

The 185 grain JHP is designed for use in the .45 ACP cartridge and does not have a cannelure, as it is intended to be taper These three cartridges show varying degrees of crimp.

They are (from left to right) a slight or mild crimp, a good firm crimp, and too much crimp.

Most bullets intended for use in revolver cartridges have a cannelure, or crimping groove impressed into the bearing surface.

Two good examples of this are Sierra’s .45 caliber 185 grain JHP, and 240 grain JHC.

Since you mentioned steel you might want to be able to do 3 inch shells. DLM _________________Artificial intelligence is no match for natural stupidity.

I'm learning you NEVER want to argue with an idiot.

Cartridges intended for use in self-loading pistols, such as the .45 ACP, should never be given any type of crimp other than a taper crimp.

Tags: , ,